Home > Knowledge > Content

Nylon conveyor belt maintenance and repair

- Feb 10, 2018 -


1, Conveyor belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow leaching, prevent contact with acids, alkalis, oils, organic solvents and other substances, and should be one meter away from the heating device.


2, storage temperature should be maintained at a store between 18-40 ℃, relative humidity should be maintained at 50-80%.


3, during storage, the product shall be placed in rolls, shall not be folded, during the placement should be flipped quarterly.


4, different types of specifications of the conveyor belt layer should not be used together, the connector is best to use adhesive method.


5, the type of conveyor belt, structure, size, layer should be based on the conditions of use reasonable selection.


6, Conveyor belt speed generally not more than 2. 5 m / s, large block size, large abrasive materials and the use of fixed petrol discharge device should be used as low as possible.


7, the relationship between the conveyor drum diameter and the conveyor belt layer, the transmission drum, the direction of the drum and supporting roller groove angle requirements should be based on the design of transport aircraft, a reasonable choice.


8, the feeding direction should be along the running direction of the tape, in order to reduce the impact of the material when the tape should be taken chute, reducing the material falling distance; tape receiving section should shorten the distance between the roller and the use of buffer roller leakage, Conformity with soft moderation board, so as not to over-material board, scratch the belt conveyor belt.


9, the conveyor belt should pay attention to the following matters in use: ① avoid the roller is covered by the material, resulting in swirling ineffective, to prevent leaks stuck in the drum and the tape, pay attention to the lubrication of the active part, but not oily conveyor belt; ② avoid With the load to start; ③ tape deviation occurs, when applied to take measures to correct; ④ found that the local damage when the tape made of cotton repair, so as to avoid expansion;


Previous: No Information

Next: Nylon conveyor belt features

Related Industry Knowledge

Related Products

  • Oil Resistant Conveyor Belt
  • Aramid Conveyor Belt
  • Intelligent Anti-tear Steel Cord Conveyor Belt
  • High Temperature Resistant Steel Cord Conveyor Belt
  • Pipe Conveyor Belt
  • Chemicals & Fertilizers Conveyor Belt